Reactivity of V2O5&z.sbnd;WO3TiO2 de-NOx catalysts by transient methods

The reactivity of ternary V₂O₅&z.sbnd;WO₃TiO₂ de-NO_xing catalysts with compositions similar to those of commercial catalysts (WO₃ ca. 9% w/w, V₂O₅ < 2% w/w) is investigated by transient techniques (temperature programmed desorption, TPD; temperature programmed surface reaction, TPSR; and temperature programmed reaction, TPR). The results indicate that the reactivity of the ternary catalysts in the SCR reaction increases on increasing the vanadia loading, and that the ternary catalysts are more active than the corresponding binary vanadia-titania samples with the same V₂O₅ loading. Indeed the SCR reaction is monitored at lower temperatures and high NO conversions are also preserved at high temperatures. TPSR and TPR data show that at low temperatures the SCR reaction occurs via a redox mechanism that involves at first the participation of the catalyst lattice oxygen and then the reoxidation of the reduced sites by gas-phase oxygen. Based on TPSR and TPR data, the higher reactivity of the ternary catalysts has been related to their superior redox properties, in line with previous chemico-physical characterisation studies. The catalyst redox properties thus appear as a key-factor in controlling the reactivity of V₂O₅&z.sbnd;WO₃TiO₂ de-NO_xing catalysts at low temperatures. The results also show that at high temperatures the surface acidity plays an important role in the adsorption and activation of ammonia.     

Evaluation of the salt leaching method for the production of ethylene propylene diene monomer rubber foams

The thermomechanical behavior of ethylene propylene diene monomer (EPDM) foams produced with the salt leaching method has been investigated and compared with the behavior of EPDM foams obtained from conventional blowing agents. Moreover, the salt-leaching process has been optimized to minimize salt residues and the influence of different parameters (such as average particle size and particle size distribution) has been investigated. Scanning electron microscopy and density measurements highlighted that salt-leaching leads to the formation of open-cell porosity with cell dimensions of around 60 to 80 μm, while foams obtained with the two traditional foaming agents lead to closed-cell porosity. Compression set values indicate that the behavior of the foams produced with salt leaching are more similar to the unfoamed rubber, characterized by higher elasticity and low residual deformation. Two theoretical models were successfully applied to the compression curves (Mooney-Rivlin and Exponential-Logarithmic) and they highlighted the effect of foaming on the properties of EPDM rubber and in particular the higher chain extensibility obtained through the salt leaching foaming method.     

Prevention of steel corrosion in concrete exposed to seawater with submerged sacrificial anodes

This paper presents the results of a study of the effectiveness of submerged sacrificial anodes in preventing the onset of pitting corrosion in the emerged part of marine piles. Experimental tests were carried out on reinforced concrete columns with steel embedded both in chloride free concrete and chloride contaminated concrete in order to compare the effects of sacrificial anodes on passive steel and on corroding steel. Results have shown, at least under the present testing conditions, that sacrificial anodes may be more effective in preventing corrosion initiation (i.e. in providing cathodic prevention) than in controlling ongoing pitting corrosion (i.e. in guaranteeing cathodic protection). Monitoring criteria for this type of prevention are also discussed.     

Privacy Preserving Geo-Linkage in the Big Urban Data Era

Big data technologies and a range of Government open data initiatives provide the basis for discovering new insights into cities; how they are planned, how they managed and the day-to-day challenges they face in health, transport and changing population profiles. The Australian Urban Research Infrastructure Network (AURIN – www.aurin.org.au) project is one example of such a big data initiative that is currently running across Australia. AURIN provides a single gateway providing online (live) programmatic access to over 2000 data sets from over 70 major and typically definitive data-driven organizations across federal and State government, across industry and across academia. However whilst open (public) data is useful to bring data-driven intelligence to cities, more often than not, it is the data that is not-publicly accessible that is essential to understand city challenges and needs. Such sensitive (unit-level) data has unique requirements on access and usage to meet the privacy and confidentiality demands of the associated organizations. In this paper we highlight a novel geo-privacy supporting solution implemented as part of the AURIN project that provides seamless and secure access to individual (unit-level) data from the Department of Health in Victoria. We illustrate this solution across a range of typical city challenges in localized contexts around Melbourne. We show how unit level data can be combined with other data in a privacy-protecting manner. Unlike other secure data access and usage solutions that have been developed/deployed, the AURIN solution allows any researcher to access and use the data in a manner that meets all of the associated privacy and confidentiality concerns, without obliging them to obtain ethical approval or any other hurdles that are normally put in place on access to and use of sensitive data. This provides a paradigm shift in secure access to sensitive data with geospatial content.     

NetCluster: A clustering-based framework to analyze internet passive measurements data

Internet measured data collected via passive measurement are analyzed to obtain localization information on nodes by clustering (i.e., grouping together) nodes that exhibit similar network path properties. Since traditional clustering algorithms fail to correctly identify clusters of homogeneous nodes, we propose the NetCluster novel framework, suited to analyze Internet measurement datasets. We show that the proposed framework correctly analyzes synthetically generated traces. Finally, we apply it to real traces collected at the access link of Politecnico di Torino campus LAN and discuss the network characteristics as seen at the vantage point.     

VMPlanner: Optimizing virtual machine placement and traffic flow routing to reduce network power costs in cloud data centers

In recent years, the power costs of cloud data centers have become a practical concern and have attracted significant attention from both industry and academia. Most of the early works on data center energy efficiency have focused on the biggest power consumers (i.e., computer servers and cooling systems), yet without taking the networking part into consideration. However, recent studies have revealed that the network elements consume 10–20% of the total power in the data center, which poses a great challenge to effectively reducing network power cost without adversely affecting overall network performance. Based on the analysis on topology characteristics and traffic patterns of data centers, this paper presents a novel approach, called VMPlanner, for network power reduction in the virtualization-based data centers. The basic idea of VMPlanner is to optimize both virtual machine placement and traffic flow routing so as to turn off as many unneeded network elements as possible for power saving. We formulate the optimization problem, analyze its hardness, and solve it by designing VMPlanner as a stepwise optimization approach with three approximation algorithms. VMPlanner is implemented and evaluated in a simulated environment with traffic traces collected from a data center test-bed, and the experiment results illustrate the efficacy and efficiency of this approach.     

Mechanisms for SLA provisioning in cloud-based service providers

A challenge in cloud resource management is to design self-adaptable solutions capable to react to unpredictable workload fluctuations and changing utility principles. This paper analyzes the problem from the perspective of an Application Service Provider (ASP) that uses a cloud infrastructure to achieve scalable provisioning of its services in the respect of QoS constraints.First we draw a taxonomy of IaaS provider and use the identified features to drive the design of four autonomic service management architectures differing on the degree of control an ASP have on the system. We implemented two of this solutions and related mechanism to test five different resource provisioning policies. The implemented testbed has been evaluated under a realistic workload based on Wikipedia access traces on Amazon EC2 platform.The experimental evaluation performed confirms that: the proposed policies are capable to properly dimension the system resources making the whole system self-adaptable respect to the workload fluctuation. Moreover, having full control over the resource management plan allow to save up to the 32% of resource allocation cost always in the respect of SLA constraints.     

P distribution in different sediment fraction of a constructed wetland

The aim of this work was to study the accumulation and fractionation of P in the inlet and outlet sediment of a constructed wetland for the wastewater treatment of a metallurgic plant in Argentina. It was important to predict whether P could be released into the water again by changing environmental conditions or retained over time. P-fractionation was performed using a sequential extraction method. Sediment cores were sliced at depths of: 0-3; 3-7 and 7-10 cm. Sediment showed high pH values and anoxic conditions. In the inlet area, P was principally bound to the carbonate fraction, whereas in the outlet area, it was mainly bound in the residual fraction. This behavior was justified by the effluent composition, which is rich in Ca2+ and Fe3+ and presents high values of pH and conductivity. These conditions favor CaCO3 and Fe(OOH)n precipitation and the subsequent sorption of P to their surface. The sediment active layer involved in the exchange reactions was the superficial one (0-3 cm). The wetland is highly efficient in P retention. P was retained by sediment in fractions that will not release it to the water while chemical and environmental conditions of the system are maintained.     

Experience with model-based performance, reliability, and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture.